E145S
Electronic control unit
Use application field For swing-leaf or sliding-leaf gate automations 230V- The E145S electronic control unit can manage one or two swing gate operators, a sliding gearmotor or mixed systems of swing-sliding gates
- It is compatible with all receivers (3-pin or 5-pin or external) and all photocells (both BUS and tradional ones)
Functions (Programming through display and buttons)
| Basic programming | |
|---|---|
| Type of motors | Selectable (swing, sliding, mixed swing – sliding installation) |
| Operating logic | Semi-automatic, Semi-automatic step-by-step, Automatic safety, Automatic with pause reversal, Automatic step-by-step, Automatic safety step-by-step, Automatic, Automatic 1, Automatic with timer function, Semi-automatic B, Mixed (AP with pulse/CH with man present), Man Present C |
| Pause time | Independently programmable after total or partial opening (from 0 to 9 min 50 sec) |
| Number of motors | Selectable |
| Thrust power | Adjustable on 50 levels for each motor independently |
| Encoder use | Selectable |
| Limit switch | limit switch function in opening and closing, selectable independently |
| Leaf delay time in closing | Programmable (from 0 to 1 min 30 sec) |
| BUS 2-Easy device registration | Selectable |
| Motor Power | 1 and 2 (independently) |
| Working time learning | Simple self-learning (max 4 min and 10 sec).
Self-learning of working and deceleration time of the two leaves thanks to a single complete work cycle) The SAFEcoder absolute encoder learns the open/closed/slowdown positions of the gate |
| Advanced programming | |
| Maximum power at initial thrust | Selectable |
| Reverse stroke and ram stroke | Independently selectable (facilitating the coupling and uncoupling of the electric lock) |
| Leaf delay in opening | Selectable |
| Leaf 1 deceleration | Programmable, percentage of the total stroke (from 0% to 99%) |
| Leaf 2 deceleration | Programmable, percentage of the total stroke (from 0% to 99%) |
| Storable codes | Number of radio codes programmed on OMINIDEC through XF Module display |
| Pre-Flashing | |
| Photocell in closing | Selectable Function |
| ADMAP Function | Selectable |
| Anti-crushing sensitivity | Programmable there is an ENCODER (10 levels) |
| Mechanical stop angle search | Selectable if the ENCODER is present |
| Additional work time | Selectable (if ENCODERS or limit switches are not present) |
| OUT 1 and OUT2 programming | Independently selectable (17 statuses each) |
| Service request | Selectable (if the programmed number of cycles is reached, the system activates an 8 sec pre-flashing before any movement) |
| Cycle count | Selectable (upgrade of a ”countdown” – max setting 99,000 cycles) |
| File management through USB-A | |
| Board software Upgrade | Selectable |
| Board configuration Upload | Selectable |
| Toard configuration Upload | Selectable |
| Radio codes list Upload | Selectable |
| Board configuration download | Selectable |
| Board timer download | Selectable |
| Board radio code download | Selectable |
| Simply Connect | |
| The Simply Connect quick connector allows the use of connectivity devices that permit remote programming and management via web and/or App of all the automations connected to the Simply Connect cloud platform: carry out diagnosis, investigate faults, perform remote maintenance and schedule your work | |
Dimensions and technical specifications
| Model | E145S |
|---|---|
| Power supply voltage | Power switching 90V~ to 260V~ 50(60) Hz |
| Max. power | 4W Stand by, <2W with sleep function (programmable through Simply Connect) |
| Motor max power | 800 W |
| Max. accessories load | 500 mA 24V – 500 mA BUS 2easy |
| Max. electric lock load | FAAC Lock (12V~ – 24V ) – non FAAC 24V – 500 mA |
| Programming | LCD display and buttons, via Simply Connect connectivity devices |
| Status signalling | LCD Display and LED |
| Terminal board inputs | Open, Open pedestrian gate, Stop (closed), BUS 2easy, Opening safeties, Closing safeties, Power + Earth, Opening and closing limit switches, Safety edge input on opening, Safety edge input on closing |
| Terminal board outputs | Flashing light, Motors, Accessories power 24V , 2 programmable OUTPUT (default:power indicator light and fails-safe), 2 electric locks |
| Rapid connector | XF 433/868 module for OmniDEC decoding, connector for DECODER/MINIDEC/RP, USB-A, Simply Connect |
| Protection Fuses | 1 (10A) |
| Operating ambient temperature | -20°C ÷ +55°C |
Note: The electronic board E145S can control one or more swing operators, a sliding gear motor, or a mixture of swing-sliding systems.
Add To Cart
Frequently Asked Questions
The FAAC E145S is a 230V electronic control unit designed for FAAC swing gate motors in residential and light commercial applications. It offers a higher specification than entry-level control units, providing more advanced programmability and greater flexibility for installations that require more than basic open-and-close functionality.
Yes. The E145S is capable of managing two 230V swing gate leaf operators simultaneously, with programmable sequencing to control whether both leaves open together or in a staggered sequence — a useful option for narrower openings where the leaves need to clear each other before the second begins to open.
The E145S supports photocells, safety edges, and warning lights, providing multiple layers of safety protection during gate operation. The control unit processes all safety inputs in real time and will halt and reverse gate movement immediately if any safety device is triggered.
Yes. The E145S includes an auto-close timer function and can also accept timed trigger signals from external time-switch devices, making it suitable for installations where the gate needs to operate on a set schedule — such as commercial premises that open and close at regular times each day.
Yes. The E145S can be installed as an upgrade replacement for older or simpler FAAC swing gate control units, bringing improved programmability and enhanced safety features to an existing motor installation. We assess compatibility with your current system and carry out the upgrade with minimal disruption.
