- Thanks to the new 2easy and OMNIdec technologies it is compatible with the XF 433/XF 868 quick insert module (connector set-up), with the external receivers and with XP 15B and XP 20B D photocells (“BUS” connection).
- The BUS XIB interface is provided for the connection of traditional photocells.
| Model | E024S |
|---|---|
| Power supply voltage | 220-240V~ 50/60 Hz |
| Max. power | 4 W |
| Motor max power | 150 W x 2 |
| Max. accessories load | 250 mA – 400 mA BUS 2easy |
| Programming | Programming via buttons |
| Operating logic | A, E, AP, EP, A1, B, C |
| Programmable functions | (*) Logic (A, E, AP, EP, A1, B, C), Speed (high/slow)*, pause time, 2nd leaf closing delay |
| Work time (time-out) | 5 minutes (fixed) |
| Pause time | Varies according to learning (max. 10 min.) |
| Terminal board inputs | Open A, Open B, Stop, BUS (I/O) |
| Terminal board outputs | Motors, Flashing lights, Accessories power, electric lock, Contact service light (90 sec fix) |
| Rapid connector | Power supply, XF 433 or XF 868 Module |
| Integrated radio coding | DS, SLH, RC, LC (max 250 channels) |
| Protection Fuses | F1 = self-resetting – F2 = T2A-250V~ |
| Operating ambient temperature | -20°C ÷ +55°C |
* Motor types (391, 413, 415, 390, 770N, S450H); wind resistant, reverse stroke, soft touch, pre-flashing, leaf opening/closing delay, pause time
Add To Cart
Frequently Asked Questions
The FAAC E024S is a 24V electronic control unit designed for use with FAAC 24V swing gate operators. It manages all aspects of the gate motor's operation, including direction control, travel limits, safety device integration, and access control inputs, providing intelligent and reliable control for low-voltage swing gate systems.
Using a control unit specifically designed for 24V operation ensures full compatibility with the motor's electrical characteristics, enabling accurate motor management, precise obstacle detection through current monitoring, and safe operation within the low-voltage circuit. Using an incompatible control unit could result in poor performance or damage to the motor.
The E024S supports connection to photocells, safety edges, and warning indicators. These safety inputs allow the control unit to detect obstacles in the gate's path and respond immediately by stopping and reversing the gate, ensuring compliance with safety requirements for automated gate installations.
Yes. The E024S is capable of managing two 24V swing gate operators simultaneously, coordinating both gate leaves to open and close in a synchronised sequence. This makes it suitable for double driveway gate configurations at residential and light commercial properties.
Yes. Because the E024S operates on 24V DC, it is fully compatible with solar and battery-backed power systems. This makes it an ideal control unit for off-grid or remote swing gate installations where mains power is not available near the gate, while still delivering full automation functionality.
