- To be used with sliding gate gearmotors only 740 and 741.
Dimensions and technical specifications
| Model | 740D |
|---|---|
| Power supply voltage | 220-240V~ 50/60 Hz |
| Max. power | 10 W |
| Motor max power | 1.000 W |
| Max. accessories load | 0.5 A |
| Programming | 3 keys (+, -, F) and display, “basic“ and “advanced“ mode |
| Operating logic | Automatic/”Step by step” automatic/Semi-automatic/Safety/Semi-automatic B/ Manned C/ Step by step semi-automatic /Mixed logic B+C |
| Programmable functions | Function logics, Pause time, Thrust force, Gate direction, Torque at initial thrust, Brake, Failsafe, Pre-flashing, Indicator light/Timed output, Logic for safety devices at opening and Closing, Encoder (optional) for anti-crushing electronic safety device, Deceleration control and partial opening, Decelerations, Partial opening time, Work time, Service request, Cycle count |
| Work time | Programmable (0 to 4 min.) |
| Pause time | Programmable (0 to 4 min.) |
| Thrust power | Adjustable on 50 levels |
| Terminal board inputs | Open, Partial Open, Opening safety device, Closing safety device, Stop, Edge, Power supply + earth |
| Terminal board outputs | Flashing light, Motor, Accessories power supply 24V – Indicator light 24V / Timed output-Failsafe |
| Rapid connector | 5-pin fitting for Minidec cards, Decoder or RP receivers,Opening and closing limit switches, Encoder (optional) |
| Protection Fuses | 2 |
| Operating ambient temperature | -20°C ÷ +55°C |
Add To Cart
Frequently Asked Questions
The FAAC 740D is an electronic control unit specifically designed for use with FAAC sliding gate motors, including the FAAC 740 and 741 series. It serves as the operational brain of the sliding gate system, managing motor direction, speed, travel limits, safety device inputs, and access control triggers from a single centralised unit.
The 740D provides programmable travel limits, adjustable motor force sensitivity for obstacle detection, auto-close timer settings, and selectable operating modes. These parameters allow the control unit to be precisely configured to match the weight, size, and usage frequency of your specific sliding gate installation.
The 740D supports connection to photocells, safety edges, and warning lights. When any of these safety inputs are triggered during gate operation, the 740D immediately stops and reverses the gate, helping to protect pedestrians, vehicles, and animals from accidental contact with the moving gate panel.
Yes. The 740D is compatible with FAAC plug-in radio receiver modules, allowing remote transmitters to wirelessly trigger gate operation. We supply and programme compatible FAAC receivers and remotes to complete the wireless access setup.
Yes. The 740D is a suitable replacement control unit for compatible FAAC sliding gate systems where the original control board has developed a fault. We supply and install the 740D as part of a repair service, restoring full gate automation functionality without the expense of replacing the entire motor unit.
