540BPR
Electronic control unit
Use application field For 230V industrial door automation- The control unit 540BPR It can be instaleld remotely to manage industrial doors, it can also be inserted in a dedicated enclosure equipped with cut-off switch, contactors, push button control panel and activation key.
Dimensions and technical specifications
| Model | 540BPR |
|---|---|
| Power supply voltage | 220-240V~ 50/60 Hz |
| Max. power | 4 W |
| Motor max power | 800 W |
| Max. accessories load | 200 mA |
| Operating logic | B/C, B, C, EP, AP, P default = B/C |
| Programmable functions | Logics, Working time, Pause time |
| Work time (time-out) | Self-learning (0-10 min with steps of 2.5 sec) – Default = 10 min |
| Pause time | Self-learning (0-5 min with steps of 1.5 sec) – Default = 30 sec |
| Terminal board inputs | Opening, Closing, Stop, Safety in closing, Limit switch, Power supply |
| Terminal board outputs | Motor, Accessories power supply 24V |
| Rapid connector | Single/two channels control unit receiver, Decoding control units |
| Protection Fuses | F1= 6,3 A – 250V~ – F2= self-resetting |
| Operating ambient temperature | -20°C ÷ +55°C |
Add To Cart
Frequently Asked Questions
The FAAC 540BPR is an electronic control unit specifically designed for use with FAAC sliding gate motors. It manages motor operation, safety device inputs, radio receiver integration, and programmable functions, serving as the central command hub for the entire sliding gate automation system.
The 540BPR provides a range of programmable parameters including travel limit settings, motor force sensitivity, auto-close timer, pedestrian opening mode, and operating logic selection. These settings allow the control unit to be precisely configured to match the specific characteristics of the gate and the needs of the property.
Yes. The 540BPR is designed with multiple input connections that support a radio receiver module, photocells, safety edges, loop detectors, and warning lights all operating together. This allows a fully integrated and safe gate automation system to be built around a single control unit.
The 540BPR monitors motor current and can detect when the gate has encountered resistance or an obstacle. Upon detection, it immediately stops and reverses the gate to prevent injury or damage. When used with external safety devices such as photocells, the system provides an additional layer of proactive obstacle detection before contact occurs.
Yes. The 540BPR is suitable as a direct replacement control unit for compatible FAAC sliding gate systems where the original board has failed. We supply and install the 540BPR as part of a repair service, restoring full automation functionality to your existing gate motor without the cost of a complete system replacement.
