- It is compatible with all 5-pins receivers and all photocells (non BUS included) thanks to 2easy technology.
- Equipped with 2 integrated Loop detectors.
Dimensions and technical specifications
| Model | E680S |
|---|---|
| Power supply voltage | 220-240V~ 50/60 Hz |
| standby power | 7 W |
| Motor max power | 240 W |
| Max. accessories load | 800 mA |
| Accessories power supply | 24V |
| Programming | 3 keys (+, -, F) and display, 1 automatic set-up key |
| Operating logic | Automatic, Automatic 1, Semi-automatic, Parking, Parking-Automatic, Condominium, Condominium-Automatic, Manned, Remote, Custom |
| Programmable functions | Logic, Pause time, Opening/Closing power, Opening/Closing speed, Loop 1 and 2, Pre-flashing, Work time, Obstacle detection sensitivity, Cycle counter for service, LED output, Failsafe output, Status output, Service request, Beam LED lighting output |
| Work time | Programmable (from 0 to 4.1 min) |
| Pause time | Programmable (from 0 to 4.1 min) |
| Thrust power | Programmable on 50 levels |
| Speed adjustment | Programmable on 50 levels |
| Terminal board inputs | Loop 1, Loop 2, Open, Close, Closing safety devices, Stop, Emergency, Power supply 36V , Battery XBAT, BUS 2easy |
| Terminal board outputs | Flashing lamp 24V, Brushless motor, Accessories power supply 24V , 4 programmable outputs of which one with relay |
| Rapid connector | Encoder, Beam release sensor, Integrated flashing traffic light, USB (for updating firmware), 5-pin minidec, decoder, RP/RP2 receiver. |
| Integrated detector 2 independent channels | Real time self-calibration, Sensitivity independent of the loop geometry, Loop work frequency adjustment, Occupied loop message with LED display, Loop status can be directed on programmable outputs |
| Protection Fuses | 4 self-resetting |
| Operating ambient temperature | -20°C ÷ +55°C |
Add To Cart
Frequently Asked Questions
The FAAC E680S is a sophisticated electronic control unit designed for FAAC swing gate operators, particularly in demanding residential and commercial applications where advanced motor management and comprehensive safety integration are essential. It represents a step up in capability from mid-range control units, offering enhanced programmability and a broader range of operational features.
The E680S delivers precise control over the swing gate motor's operational profile, including programmable soft start and stop ramps, adjustable operating speeds, and fine-tuned obstacle sensitivity settings. These capabilities protect the gate, motor, and any connected structures from the mechanical stress of abrupt starts and stops, while also improving the overall appearance and feel of gate movement.
Yes. The E680S is well suited to commercial environments where robust access control and safety compliance are important. Its extensive input/output connectivity supports the full range of FAAC and third-party safety and access control accessories, enabling the construction of a comprehensive, multi-layered gate security system around a single intelligent control unit.
The E680S continuously monitors motor current during operation and can detect abnormal load conditions that may indicate an obstacle, mechanical binding, or motor overload. Upon detecting these conditions, it stops the motor immediately to prevent damage. Thermal protection features further safeguard the motor during periods of intensive sequential operation.
When integrated with compatible FAAC connectivity accessories, the E680S can provide operational status information and fault indicators that assist with remote diagnostics. This is particularly valuable for commercial installations managed by a facilities team or for service technicians carrying out preventative maintenance checks. We advise on the best connectivity options for your specific installation.
