- To be used with sliding gate gearmotors only C851.
Dimensions and technical specifications
| Model | E850S |
|---|---|
| Power supply voltage | 220-240V~ 50/60 Hz |
| Max. power | 18 W |
| Motor max power | 1.5 KW |
| Max. accessories load | 500 mA |
| Accessories power supply | 24V |
| Programming | N° 3 buttons (P1, P2, ENTER) and display |
| Operating logic | Automatic, Semi-automatic, Automatic Step-by-Step, Semi-automatic Step by Step, Dead-man, Condominium |
| Programmable functions | Logic, Pause time, Partial opening time, Pre-flashing, Closing photocells, Working time, Fail-Safe output, Service request. |
| Work time | Programmable |
| Pause time | Programmable |
| Terminal board inputs | Open, OpenB – Close, Safety in closing, Safety in opening, Stop, SAFE, 230V~ Power Supply + Earth |
| Terminal board outputs | Flashing lamp, Electrobrake, 24V Power supply, Fail-Safe, Warning light / Status Output |
| Rapid connector | Opening and closing limit switch, Opening and closing deceleration |
| Protection Fuses | F1=F 10A-250V~ F2=T 0,5A-250V~ |
| Operating ambient temperature | -20°C ÷ +55°C |
Add To Cart
Frequently Asked Questions
The E850S is specifically designed for use with the FAAC C851 sliding gate gearmotor and should not be used with other gate operator models.
The unit supports several operating logics, including automatic, semi-automatic, step-by-step, dead-man, and condominium modes, allowing flexibility for different site requirements.
Programming is performed through a built-in display and three control buttons (P1, P2, and ENTER), making setup and adjustments straightforward.
Yes. It includes dedicated inputs for opening and closing safety devices, stop commands, and fail-safe monitoring to enhance gate system safety.
Yes. The controller includes rapid connector inputs for opening and closing deceleration, as well as limit switch management for smoother gate movement.
