- It can be used with all automatic bollard models, J275 2K 20 HA, JS48 HA and JS80 HA.
- Compatible with functioning accessories with FAAC proprietary protocol two-wire cabling.
Dimensions and technical specifications
| Model | JE275 |
|---|---|
| Power supply voltage | 230V~ (+ 6% – 10%) 50/60 Hz |
| Max. power | 7W |
| Motor max power | 1.200W |
| Accessories power supply | 24V |
| Max. accessories load | 500mA |
| Operating ambient temperature | -20°C ÷ +55°C |
| Protection Fuses | F1 = 10A-250~ F2=T 0,8A-250~ |
| Operating logic | Automatic, Automatic 1, Semi-automatic, Parking, Parking-Automatic, Condominium, Condominium-Automatic J Series, Manned, Remote, Custom |
| Work time | Programmable (from 0 to 4 min) |
| Pause time | Programmable (from 0 to 4 min) |
| Thrust power | Programmable on 50 levels |
| Terminal board inputs | Loop 1, Loop 2, Open, Close,Safety in closing, Stop, Emergency, 230V~ Power supply + Earth |
| Terminal board outputs | Flashing lamp, motor, Accessories power supply 24 VDC, Fail-Safe, Status output, 24V led lighting output, BUS |
| Rapid connector | Opening and closing limit switches, motor condenser |
| Programmable functions | Logic, Pause time, Thrust, Loop l and 2, Torque at initial thrust, Pre-flashing, Slow Closing, Deceleration time, Work time, LED output, Failsafe output, Status output, BUS output, Service Request |
| Integrated detector 2 independent channels | Real time self-calibration, sensitivity independent from loop geometry, loop operating frequency adjustment, message of “loop engaged” with LED display, loop status can be directed to programmable outputs, adjustment time over 2 levels. |
Add To Cart
Frequently Asked Questions
The JE275 is compatible with FAAC automatic bollards, including the J275 2K 20 HA, JS48 HA, and JS80 HA models.
Yes. The control unit supports accessories that use FAAC's proprietary two-wire BUS communication protocol, simplifying installation and connectivity.
The JE275 offers a wide range of operating modes, including automatic, semi-automatic, parking, condominium, remote, manned, and custom logic settings.
Yes. The controller features an integrated dual-channel loop detector with real-time self-calibration and adjustable sensitivity, allowing accurate vehicle detection for bollard control.
Yes. The JE275 allows installers to program thrust power across 50 levels, along with adjustable work time and pause time settings for precise bollard operation.
